- AWX-WIMAX CPE
Overview
Description
The AWX device is one of the most advanced, low power, indoor, WIMAX CPE devices on the market today. It is IEEE802.16e compliant and is available in two models. The 2.5 GHz model operates in the licensed 2.5 GHz to 2.7 GHz band and the 3.5 GHz model operates in the licensed 3.3 GHZ to 3.6 GHz band. The AWX is available with three interface options: Ethernet, PCI-Express and USB.
AWX-Ethernet
The AWX-Ethernet is a compact device with a standard Ethernet interface. It can be powered by either a 5V AC/DC converter or a USB cable connected to your computer. SIMO (Single Input Multiple Output) operations are supported. With W8320-Ethernet, Loop makes portable WiMAX available today on existing certified WiMAX networks. This allows operators to offer new services without waiting for WiMAX Mobile networks.
AWX-2.5 GHz
|
Radio Frequency
|
||||
|
Standard
|
IEEE 802.16e 2005 with WiMAX Profile Wave 2
|
Host Interface
|
Ethernet RJ45
|
|
|
Antenna
|
ETH and USB -embedded antennas (one 6 dBi patch and one omni chip)
|
Modulation
|
QPSK / 16QAM / 64QAM
|
|
|
Signal Type
|
OFDM 512/1024 FFT
|
Radio Access
|
TDD
|
|
|
Frequency Band
|
2.5 GHz to 2.7 GHz
|
Channel Bandwidth
|
5 MHz, 10 MHz
|
|
|
QoS
|
UGS, rtPS, nrtPS, ErtPS and BE
|
ARQ
|
Stop and Wait, Go Back N
|
|
|
Error Correction
|
Reed-Soloman / Convolutional Viterbi
|
|
|
|
|
Up Link Channelization
|
Per IEEE 802.16e 2005 standard
|
Equalization
|
Hybrid Channel Equalization Estimation
|
|
|
Payload Header Suppression
|
Ethernet, IPV4
|
Bandwidth Request
|
Per IEEE 802.16e 2005 standard
|
|
|
Tx Output Power
|
20 dBm ± 2 dB
|
Rx Sensitivity @
BER 10e-6, 5 MHz
And 10 MHzl
|
5 MHz:
QPSK: -91dBm
16QAM: -85dBm
64QAM: -78dBm
|
10 MHz:
QPSK: -88dBm
16QAM: -82dBm
64QAM: -75dBm
|
|
Management
|
SNMP v2 MIB 802.16f (Phase 2), Web Page, Serial Port (Phase 1)
|
|
|
|
|
Security
|
PKMv2, EAP-TLS and EAP-TTLS (Phase 2)
|
Authentication
|
X.509 Interface
|
|
|
Power Supply
|
5V AC/DC adaptor or USB power
|
Power Consumption
|
Max. 5 W
|
|
Dimensions
(WxHxD)
|
ETH interface – 71x90x31 mm
|
Weight
|
ETH interface -150 g
|
|
Temperature
|
Operating : 0 to 55°C
Storage : -40 to 85°C
|
Humidity
|
95% Condensing
|
|
CE (pending)
|
|
|
|
|
Radio Frequency
|
||||
|
Standard
|
IEEE 802.16e 2005 with WiMAX Profile Wave 2
|
Host Interface
|
Ethernet RJ45
|
|
|
Antenna
|
ETH and USB -embedded antennas (one 6 dBi patch and one omni chip)
PCE -two embedded omni chip antennas
|
Modulation
|
QPSK / 16QAM / 64QAM
|
|
|
Signal Type
|
OFDM 512/1024 FFT
|
Radio Access
|
TDD
|
|
|
Frequency Band
|
3.3 GHz to 3.6 GHz
|
Channel Bandwidth
|
5 MHz, 10 MHz
|
|
|
QoS
|
UGS, rtPS, nrtPS, ErtPS and BE
|
ARQ
|
Stop and Wait, Go Back N
|
|
|
Error Correction
|
Reed-Soloman / Convolutional Viterbi
|
|
|
|
|
Up Link Channelization
|
Per IEEE 802.16e 2005 standard
|
Equalization
|
Hybrid Channel Equalization Estimation
|
|
|
Payload Header Suppression
|
Ethernet, IPV4
|
Bandwidth Request
|
Per IEEE 802.16e 2005 standard
|
|
|
Tx Output Power
|
20 dBm ± 2 dB
|
Rx Sensitivity @
BER 10e-6, 5 MHz
And 10 MHzl
|
5 MHz:
QPSK: -91dBm
16QAM: -85dBm
64QAM: -78dBm
|
10 MHz:
QPSK: -88dBm
16QAM: -82dBm
64QAM: -75dBm
|
|
Management
|
SNMP v2 MIB 802.16f (Phase 2), Web Page, Serial Port (Phase 1)
|
|
|
|
|
Security
|
PKMv2, EAP-TLS and EAP-TTLS (Phase 2)
|
Authentication
|
X.509 Interface (Phase 2)
|
|
|
Power Supply
|
5V AC/DC adaptor or USB power
|
Power Consumption
|
Max. 5 W
|
|
Dimensions
(WxHxD)
|
ETH interface – 71x90x31 mm
|
Weight
|
ETH interface -150 g
|
|
Temperature
|
Operating : 0 to 55°C
Storage : -40 to 85°C
|
Humidity
|
|