From July 1 to July 31 Pre-Order Start for AWM003 and AP2620
Thank you for your contribution in Indigogo!
We have AWM003 is higher memory version for AWM002.
Many are asking and also the SPI version.
Below are the prices.
AWM002-SPI 15USD/pcs for SPI version less than 10 pcs.
AWM003 20USD/pcs for ordering less than 10 pcs.
AP2620 55USD/pcs for ordering less than 10 pcs
You can pay by PayPal (our account is firstname.lastname@example.org)and add on the shipping fee.
Normal shipping is 10 days to 20 days by surface parcel shipping 5USD only.
If you like to be faster, we can ship by EMS and kindly send us (email@example.com) your full address and telephone numbers, and we will give you a quote. Or you can check with link below.
Kindly add on 10% for total due to the exchange rate for PayPal is different with normal bank.
Thank you all and wish you like our products to develop more new devices and enjoy it!
The answer is AWUHN2405 Super Antenna WiFi USB dongle!
Embedded High Power RF power amplifier enhances the output and receiving sensitive also. High performance signal strength made by good EVM control.
As a WiFi Internet Service Provider, you can use this to link with WiFi Router’s (AWAPN2403) USB port as a WAN linking. Set up the hotspot base station and provide the service without CPE at all.
The cost effective is 50% off. Maintenance and rent place fee also decrease.
The best choice for ISP is AWUHN2405 and AWAPN2403.
AWUHN2405 can be indoor and outdoor using.
The same withAWUHN2405 isMegabond X and Top Cather.
AWUHN2405 is mixed indoor and outdoor applications.
Megabond X is only for indoor using.
Top Cather is the Best for car, boat and difficult environments.
What is it? Why should I have a WiFi USB dongle (WiFi USB LAN Card) as the WAN of the Router?
Normally router has the RJ45 ports, there is one marked as WAN. In the router mode, the IP address three octets are different with other LAN devices. Like WAN is 192.168.1.x, LAN is 192.168.111.x. The WAN(RJ45 port) normally is linked with switch or the other router’s LAN port. Our setting is make a WiFi USB dongle linked with WiFi Router’s USB port as a WAN linking. To avoid the radio frequency interference, the channel of the WiFi USB dongle is always different with the WiFi router.
The application is you can use a high gain WiFi USB dongle (AWUHN2405, Top Catcher, Megabond) to get the WiFi internet linking from WISP’s base station far away like 5km. Those dongles can mount in outdoor or on glass to get the signal from outside. The WiFi USB dongle’s USB cable can be 10 or even 20Meters long. The WiFi Router can broadcast the signal easily in the area we want, like dome or inner room.
Before is using a WiFi CPE to get the signal and use the CAT5 cable to link with the WiFi router. Now we replace WiFi CPE with WiFi USB dongle. Not only the cost also the application, could be the repeater easily
To see the diagram we show here. Welcome to ask us if you have any further suggestion. We would love to develop and serve you as the premium customer.
For more information of products, please check below links.
AWAPN2403, AWUHN2405, Top catcher, Megabond.
Real AP Router its CPU embedded can do more than WiFi USB dongle soft AP, like SNMP, multi SSID, VPN, multiple VLAN etc..
This is not an USB/ PCIe client in Module, this is a full AP Router full function in a module.
The World First AP Router in the market today. We are expecting many copy cat of this concept.
What advantages for WiFi AP Router Module (Mini PCIe Card)?
- Cost Optimized for specific application.
Save your time cost and development cost.
- Flexible for draft design and application.
You can save your time to design a new communication application in short time like 2 weeks only then finished, easy upgrade, ie. Upgrade from 11b/g/n to 11a/b/g/n, and high power etc..
- Time to Market, plug and play.
- Software transparency.
- Full AP Router Functions / Features.
- Easy Upgradable.
- Compact Tiny Size.
- Easy for Controller design.
Hope everyone like this idea and welcome to ask us more questions!
Taipei, Taiwan WiFi products are marked with High power promotion, are they real High Power?
All electronic products’ or devices’ output power are counted by Watt. There are three units seen in WiFi products frequently, dBm, dBi, and EIRP. Regarding dB and Watt conversion table you can link to http://www.asiarf.com/dB-to-Watt-Conversion-Table-support-view-5.html take a look.
Below more detail about these units:
As we know Watt is the electronic power unit.
dBm is an abbreviation for the power ratio in decibels (dB) of the measured power referenced to one milliwatt (mW). Most of vendors mark the highest output power is based on IEEE802.11b mode.
dBi is the forward gain of an antenna compared with the hypothetical isotropic antenna, which uniformly distributes energy in all directions.
EIRP (Equivalent isotropically radiated power) is the sum of output power of WiFi device and transmission loss (cable loss) and antenna’s gain. Normally you will see the amount of EIRP is big number like 10Watts or even more. Donot be scared, go to check and see, you will find out where you need to watch out for the radiation.
There is another important index called EVM (Error Vector Measurement). The lower percentage, the quality of signal transmission is better. Like 3% is better than 5%. If the EVM is higher than 5.5%, then you can see the signal index is good, but transfer the data, no. That means you cannot get homepage from internet either. Most of vendors’ QC index is 5% or 5.5%, some special high quality products is 3%, meanwhile the output power index will be a little lower. For the linking quality is also much better. From now on, if you compare the high power products, you should look at both indexes.
Hope these is helpful for your choice with High Power Products.