Sale!

Wi-Fi HaLow Sub-GHz Wireless Module Morse Micro MM6108 MM610X-001

$22.58

MM610X-001 is a Wi-Fi HaLow Sub-GHz wireless module based on Morse Micro® MM6108 RF SOC

800 in stock (can be backordered)

Quantity Discount (%) Price
1 - 99 $22.58
100 - 499 25.6 % $16.80
500+ 28.48 % $16.15

Description

MM610X-001 is a Wi-Fi HaLow Sub-GHz wireless module based on Morse Micro® MM6108 RF SOC

Sub 1GHz
Distance > 1 KM (0.625 Mile)

INTRODUCTION

HaLow (pronounced halo) is a low-power, long-range version of the IEEE 802.11 Wi-Fi standard. HaLow is based on the Wi-Fi Alliance 802.11ah specification and is expected to play an important part in the Internet of Things (IoT).

Wi-Fi CERTIFIED HaLow™, the designation for products incorporating IEEE 802.11ah technology, augments Wi-Fi by operating in spectrum below 1 gigahertz (GHz) to offer longer range and lower power connectivity.

Excellent RF performance, MM610X-001 module has excellent sensitivity with good selectivity and blocking performance. MM610X-001 module come with U.FL connector for external Sub-GHz antenna.

Certificate  FCC IC CE TELEC NCC RCM is applying.

Wi-Fi_CERTIFIED_HaLow_features_benefitsThere are many IO interfaces: UART, SDIO, SPI, I2C and rich GPIOs for PWM and switch functions.

2 KMs LOS distance communication: MM610X-001 module is tested to support up to 2000 meters LOS distance communication, good for both indoor and outdoor IoT applications.

20Mbps UDP Throughput is the best capacity compared with all Wireless IoT long distance throughput. The PHY data rate is 32.5Mbps.

Features

Protocol

  • 11ah OFDM PHY supporting future WFA HaLow certification
  • BPSK & QPSK, 16-QAM & 64-QAM Modulation
  • Automatic frequency & gain control
  • Packet detect & channel equalization
  • Forward Error Correction (FEC) coding & decoding
  • Supports Modulation and Coding Scheme (MCS) levels MCS 0-7 and MCS 10
  • Supports 1 MHz duplicate mode
  • Supports optional Traveling Pilot
  • 11ah MAC supporting future WFA HaLow certification
  • Support for STA and AP roles
  • Listen-Before-Talk (LBT) access with energy detect
  • 11 power save
  • 11 fragmentation and defragmentation
  • Power-Saving Target Wake Time (TWT) support for long battery life
  • Automatic and manual MCS rate selection

Radio Operation

  • Single-stream max data rate of 32.5 Mbps (MCS=7, 64-QAM, 8MHz channel, 4 uSec GI)
  • Radio supporting worldwide Sub-1 GHz frequency bands
  • Frequency Range: 850-950 MHz
  • Channel width options of 1/2/4/8 MHz 

Transmitter Performance

  • Tx output power (dBm): +21 dBm (Typical)
  • Tx EVM @ 27dBm BPSK (dB)

 RF Interface

  • On-chip 8dBm output power, with FEM reach 27dBm
  • External antenna connector

 Power Consumption

  • 37 mA RX current @ Listen
  • 40 mA RX current @ Active Receive

Power Management Unit (PMU) for various modes of operation

  • Power-down (interrupt driven wake)
  • Hibernate mode (internal / external wake)
  • Target Wake Time mode
  • Active Receive / Transmit mode
  • Integrated DC-DC converter supports a wide supply voltage, from 1.8V to 3.6V

Regulatory Certifications by requested

  • CE/FCC/JATE/NCC
  • ESD: HBM 2KV / MM 200V, Latch-up: 150mA
  • Halogen-free / RoHS 2.0 / Reach Annex 14 & 17

Operating Range

  • 0-3.6V for VBATT and VDDFEM.  1.8-3.6V for VDDIO
  • -40 to +85°C

Dimensions

  • 22 mm x 17.0 mm x 2.0 mm (module)

Security

  • AES encryption engine
  • Hardware support for   SHA1  and   SHA2  hash  functions   (SHA-256,   SHA-384, SHA-512)
  • WPA3 including protected management frames (PMF)
  • Opportunistic Wireless Encryption (OWE)

MCU Peripherals

  • 12-bit 1 Msps SAR ADC
  • 12 × GPIO
  • 3 × UART, 1 x SPI, 1 x I2C
  • 2 × 16-bit Timer/Counter
  • 1 × 32-bit Timer/Counter
  • 32-bit Real Time Counter
  • 24-bit Low Energy Timer for waveform generation
  • 2 × Watchdog Timer
  • Power Management Unit for power state switching
  • SDIO 2.0 compliant slave interface
  • SDIO 2.0 Default Speed (DS) at 25MHz
  • SDIO 2.0 High Speed (HS) at 50MHz
  • Support for both 1-bit and 4-bit data mode
  • Support for SPI mode operation

Applications

Surveillance Cameras and SensorsCloud Connectivity
Low-power Sensor NetworksBuilding Automation Systems (BAS)
Asset Tracking and ManagementMachine Performance Monitors & Sensors
Building Access Control & SecurityDrone Video and Navigation Communications
Connected Toys and GamesRural Internet Access
Agricultural and Farm NetworksUtility Smart Meter and Intelligent Grid
Proximity SensorsIndustrial Automation Controls
Smart Home AutomationEV Car Chargers
AppliancesConstruction Site Connectivity
Smart Signs and KiosksRetail Point-of-Sale Terminals
Vehicle-to-Vehicle CommunicationsIP Sensor Networks
Biometric IDs and KeypadsWarehouse Connectivity
Intelligent Lighting ControlsBT/ZigBee(™)/Z-Wave(™) to Wi-Fi HaLow Gateways
Wi-Fi to Wi-Fi HaLow BridgesWi-Fi HaLow Client Adapters/Dongles
Smart City Networks

 

Module Diagram

MM610X-001 SoC block diagram

MM6108-Block-diagram

Module Schematic Symbol Diagram

MM610X-001-symbol

Module PCB Foot Print PADs

Module PCB Foot Print PADs

Pins Description

PinNameTypePrimary FunctionAlternate & Other Function(s)
1VDD_FEMPowerExternal PA/LNA power (3.3v)
2GND_1PowerGround
3GND_2PowerGround
4RSSIO
5ID_0OReserved
6ID_1OReserved
7VDD_BUCKPowerReserved
8WAKEI
9RESET_NI
10VDD_VBATPowerMain module Power (3.3v)
11GPIO_0I/OGeneral Purpose IO0PWM1_0, SPI0_CS3
12GPIO_1I/OGeneral Purpose IO1PWM1_1
13GPIO_2I/OGeneral Purpose IO2UART0_RX, PWM1_2
14GPIO_3I/OGeneral Purpose IO3UART0_TX, PWM1_3
15GPIO_4I/OGeneral Purpose IO4I2C_SDA
16GPIO_5I/OGeneral Purpose IO5I2C_SCL
17GPIO_6I/OGeneral Purpose IO6UART1_RX
18EXT_HOST_SELIMode selection
19VDD_IOPower3.3V VDD_IO Supply
20SDIO_D2I/OSDIO D2
21SDIO_D2I/OSDIO D3
22SDIO_CMDI/OSDIO CMD
23SDIO_CLKI/OSDIO CLK
24SDIO_D0I/OSDIO D0
25SDIO_D1I/OSDIO D1
26N.C.PowerReserved
27GPIO_7I/OGeneral Purpose IO7UART1_TX
28GPIO_8I/OGeneral Purpose IO8SPI0_SCK
29GPIO_9I/OGeneral Purpose IO9SPI0_CS0
30GPIO_10I/OGeneral Purpose IO10SPI0_D0
31GPIO_11I/OGeneral Purpose IO11
32N.C.I/OReserved
33JTAG_TDOOJTAG Data Out
34JTAG_TMSIJTAG Mode Select
35JTAG_TDIIJTAG Data In
36JTAG_TRST_NIJTAG Test Reset
37JTAG_TCKIJTAG Clock
38N.C.IReserved
39GND_3PowerGround
40GNDPowerGround
41GNDPowerRF Ground
42ANTRFRF signal launch pad
43GNDPowerRF Ground

Electronic Specification

ItemSpecification
RF Transmit PowerTx output power (dBm): +27 dBm (Typical)
Tx EVM @ 27dBm BPSK (dB)
RF Receiver Sensitivity-105 dBm sensitivity (1% PER) @ 3250 kbps BPSK
-100 dBm sensitivity (0.1% BER) @ 9750 kbps QPSK
-94 dBm sensitivity (0.1% BER) @ 19500 kbps 16-QAM
-88 dBm sensitivity (0.1% BER) @ 32500 kbps 64-QAM
Power Consumption37 mA RX current @ Listen
40 mA RX current @ Active Receive
Antenna1 x UFL (IPEX) connector
Data Rate250 kbps, 500 kbps, 1 Mbps, 2 Mbps
Physical Connectors43 holes PCB board edge stamp holes
Operation Voltage2.9V to 3.6V
Operation Temperature-40 to 105 ℃
Security128 Bit AES encryption
InterfacePWM, UART, I2C, USB. GPIO

 

Power Consumption

Operation ModeConsumption
Standby30mA
Operation15 mA RX current @ 250 kbps O-QPSK DSSS
15 mA RX current @ 1 Mbps GFSK
5.4 mA TX current @ 0 dBm
34 mA TX current @ 10 dBm
180 mA TX current @ 20 dBm
1.2 μA Deep Sleep Mode

Ordering Information

Part NumberDescription
MM610X-001WiFi HaLow Module

Additional information

Weight0.005 kg

Reviews

There are no reviews yet.

Be the first to review “Wi-Fi HaLow Sub-GHz Wireless Module Morse Micro MM6108 MM610X-001”

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…