WiFi Mesh Outdoor 11ac 1300 High Power AP Router Range Extender 1KM to 2KM Archer Go

WiFi Mesh Outdoor 11ac 1300 High Power AP Router Range Extender 1KM to 2KM Archer Go

Quantity price please make an offer below Quantity price please make an offer below

Archer Go is a WiFi Mesh Outdoor 11ac High Power AP Extender. 680mm L x 85mm Phi. With 4TX4R Omni Antenna achieves a data rate up to 1300Mbps.

Description

Archer Go

WiFi Mesh Outdoor 11ac 1300 High Power AP Router WiFi Range Extender AP

Archer Go is a WiFi Mesh Outdoor 11ac High Power AP. 680mm L x 85mm Phi. With 4TX4R Omni Antenna achieves a data rate up to 1300Mbps.

Embedded 4G/LTE M.2 slot is a WiFi hot spot best solution.

With WiFi and LTE (optional) high power antennas, the transmission range can reach to 2KM maximum.

This product supports AP/Client modes. It is ideal for multi-purpose installation to share wireless connection.

FEATURES

  • MediaTek MT7620a+ MT7612E chipset
  • Firmware: OPENWRT, Linux 2.6 SDK, eCOS with IPv6
  • Flash 16MB/8MB, DDR2 128MB/64MB
  • Antennas: WiFi (Omni ), LTE (optional)
  • Support boot from Flash
  • Compatible with wireless IEEE 802.11 ac/b/g/n standard with data rates of up to 1300Mbps
  • Increases wireless coverage by up to 6 times*
  • Supports WMM, WMM-PS (IEEE 802.11e QoS standard)
  • Supports 64/128-bit WEP, WPA (TKIP with 802.1x), WPA2 (AES with IEEE 802.1x) for high security level
  • Multi-modes: AP/Client
  • 16 Multiple BSSID
  • WEP64/128, TKIP, AES, WPA, WPA2, WAPI
  • QoS: WMM, WMM-PS
  • WPS: PBC, PIN

Hardware Features:

StandardWireless: IEEE 802.11ac/a/b/g/n (4Tx4R)
Wireless LAN4T4R Mode 1300Mbps
MemoryFlash 8/16/32MB, DDR2 64/128/256MB
Antenna4×4 Omni Antenna Embedded
2.4GHz 6dBi
5GHz 8dBi
3G 4G LTE (item 1 or 2)

  1. Directional 13-17dBi
  2. Dipole 3dBi
Interface

External Case:

  • Ethernet x 1 IP67 connector
  • SIM card slot x 1 IP67 connector
  • SMA female x 1 IP67 connector

Internal PCBA:

  • Ethernet x 2(1 WAN, 1 LAN)
  • 2 x 1 for 3G/LTE/5G module
  • SD card slot x 1
  • SIM card slot x 1
Frequency Range

2.4G: 2.400 ~ 2.4835GHz
5GHz: 5.15GHz ~5.875GHz

Number of Selectable
Channels
2.4GHz
2.412GHz ~ 2.4835GHz CH1 to CH14
5GHz
Band1
5150MHz ~ 5250MHz: CH36, CH40, CH44, CH48
Band2
5250MHz ~ 5350MHz: CH52, CH56, CH60, CH64
Band3
5470MHz ~ 5725MHz: CH100, CH104, CH108, CH112, CH116, CH120, CH124, CH128, CH132, CH136, CH140
Band4
5725MHz ~ 5850MHz: CH149, CH153, CH157, CH161, CH165
Data Rate802.11a: 54Mbps
802.11b: 1, 2, 5,5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
802.11n: up to 300Mbps
802.11ac: 1300Mbps@TX/RX
Output average Power

Adjustable in firmware

11b: 25dBm +/- 1.5dbm @ 11Mbps
11g: 25dBm +/- 1.5dbm @ 54Mbps
11n: 24dBm+/- 1.5dbm @ MCS7 HT20
24dBm@MCS7 HT40
11a: 22dBm +/- 1.5dBm @ 54Mbps
11a/n: 22dBm +/- 1.5dBm @ MCS7 HT20
21dBm@ MCS7 HT40
20dBm@ MCS9 HT80
11ac: 22dBm +/-  1.5dBm @ MCS7 HT20
11ac: 21dBm +/-  1.5dBm @ MCS7 HT40
11ac: 21dBm +/-  1.5dBm @ MCS9 HT80
Receiver Sensitivity11b: -91dBm @11Mbps
11g: -77Bm @54Mbps
11n: -76dBm @MCS7 HT20
-73dBm @MCS7 HT40
11a: -73Bm @54Mbps
11a/n: -73dBm @MCS7 HT20
-71dBm @MCS7 HT40
11ac: -59dBm +/- 2dBm @ MCS8 HT20
11ac: -56dBm +/- 2dBm @ MCS9 HT40
11ac: -53dBm +/- 2dBm @ MCS9 HT80
TemperatureOperating: 0°C ~ +60°C
Dimension680mm (length) x 85mm (diameter)
Holder1x Bracket set, 4 x screws
Coverage Area1KM to Mobile
2KM Repeater mode
Power InputDC Power Jack from 9V to 18V Barrel D=2.0mm, 12V 2A
Power ConsumptionAverage 10W

 

SOFTWARE FEATURE

  • Support OPENWRT, MTK SDK
 Network Features:
  • Video, Storage
  • DHCP Client/Relay/Server
  • Dynamic DNS
  • NTP Client
  • DNS Cache/Proxy
  • Firewall
      1. MAC/IP/Port Filter
      2. Virtual Server
      3. DMZ
      4. Content Filter
WiFi:
  • 4 Transmit and 4 Receive paths (4T4R)
  • 20MHZ/40MHZ/80MHz bandwidth.
  • Support Multiple SSID
  • Clock rate up to 400MHz Legacy and High Throughput Modes.
  • Support WPS
  • High security with build-in: WEP 64/128, TKIP, WPA, WPA2 mixed,802.1xand 802.11i
  • 802.1X Authentication with RADIUS Client
  • QoS-WMM.WMM-PS

PACKAGE

There are two versions

Luxury version

Regular Version

Regular Version:

  1. Archer Go
  2. Bracket 1 set (4 screws and two plates)
  3. RJ45 IP67 water proof connector
  4. 10M outdoor double shield Ethernet cable with injector for power input
  5. DC 18V Power supply
  6. User manual
  7. Warranty card

 Luxury Version:

  1. Archer Go
  2. Bracket 1 set (4 screws and two plates)
  3. RJ45 IP67 water proof connector
  4. 10M outdoor double shield Ethernet cable with injector for power input
  5. DC 18V Power supply
  6. User manual
  7. Warranty card
  1. LTE module
  2. SIM card extender
  3. SIM card IP67 water proof connector
  4. SMA IP67 water proof connector and protection cap
  5. 3G/4G LTE antenna, 17dBi Grid antenna or 4dBi Dipole antenna
WiFi MESH High Power Outdoor AP 11ac 1300 LTE Archer Go
WiFi MESH High Power Outdoor AP 11ac 4x4 1300 LTE Archer Go
WiFi MESH High Power Outdoor AP 11ac 1300 LTE Archer Go concept diagram
Archer Go Installation guide
×