WiFi6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NP1

Sale!

WiFi6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz MT7915 AW7915-NP1

$39.90 Quantity price please make an offer below

AW7915-NP1 is a 4T4R 2401 Mbps WiFi6 11ax Mini PCIe Module, Dual Bands selectable is configurable.

40 in stock (can be backordered)

Description

AW7915-NP1 is a WiFi6 11ax 4T4R 2401Mbps mini PCIe Module by MT7915.

~~~ Thank you for your orders!  Start shipping now!~~~

AW7915-NP1 is a WiFi6 Mini PCIe Module 4T4R based on Mediatek MT7915AN which is a WiFi Mini PCIe single chip which supports 2401 Mbps PHY rate with  PCIe2.1. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, offering feature-rich wireless connectivity at high standards, and delivering reliable, cost-effective throughput from an extended distance.

Optimized RF architecture and base band algorithms provide superb performance and low power consumption. Intelligent MAC design deploys a high efficient offload engine and hardware data processing accelerators which completely offloads Wi-Fi task of the host processor. MT7915AN is designed to support standard based features in the areas of security, quality of service and international regulations, giving end users the greatest performance any time and in any circumstance.

MT7915AN is designed to support high data throughput over WiFi. The host interface PCIe are integrated to provide stable bandwidth between the host platform and MT7915AN.

Deep sleep mode:

Multiple power domains are implement on chip. In deep sleep mode, the PMU could be configured in a low power state to save the power consumption.

Two CPU systems: There are both 32-bits RISC MCU subsystem. The CPU has its local memory. There are several options of clock frequency to provide the optimal performance with the best power consumption. The 32-bit RISC MCU is used to do clocck control, power management, and host interface configuration. PDMA (packet DMA) engines are integrated to support on-the-fly data buffer management.

MT7915AN had the WiFi MAC and BBP subsystem and use with MT7975N together, which provide the best-in-class radio and low power performance. And the Wi-Fi MAC and BBP subsystem and use with MT7975N together, which provide the best-in-class radio and low power performance.

With the advent of 802.11ax/ac, multi-user MIMO (MU-MIMO) is defined. MT7915AN supports MU-MIMO with different configurations.

MT7915AN Block Diagram

MT7915 11ax WiFi6 block compact diagram

Features:

  • Supports 4×4 4SS 11ax wave2 MU-MIMO
  • MU-MIMO configurations of
    • 4 users: 4*1ss
    • 3 users: 2*1ss + 1*2ss or 3*1ss
    • 2 users: 2*2ss or 1*1ss + 1*2ss or 2*1ss
  • Supports 5, 10, 20, 40, 80, 80+80 channels
  • Suppport MU-OFDMA TX/RX
  • Embedded ARM Cortex R4 processor for full host CPU offload
  • Embedded 32-bit RISC microprocessor
  • Support STBC, LDPC, TX Beamformer and RX Beamformee
  • Greenfield, mixed mode, legacy modes support
  • Highly integrated RF with 40nm low power process
  • 4T4R with support of up to 2401Mbps PHY rate
  • Configurable 4×4/3×3 or 2x2n+2x2ax DBDC
  • Noise mitigation:
    • Supports background scan function for fast channel switching
    • Supports spectrum analysis for non-Wi-Fi signals
  • Intelligent power saving
  • WFA WMM, WMM PS (QoS)
  • Integrate high efficiency internal 4G/5G PAs
  • Intelligent Calibration (iCal) reduces the production time
  • WoWLAN via GPIO (client mode), supports Host Sleep (AP mode)

Specification:

Standards Wireless: IEEE 802.11ax/ac/b/g/n (4Tx4R)
Data Rate IEEE802.11ax 2401Mbps @TX/RX
IEEE802.11ac 1733Mbps @TX/RX
IEEE802.11a/n 600Mbps @TX/RX
IEEE802.11a/g 108Mbps
IEEE802.11b 22Mbps
Output Power 11b: 23dbm+/- 1.5dbm @11Mbps
11g: 20dbm+/- 1.5dbm @54Mbps
11g/n: 20dBm +/- 1.5dbm @MCS7, HT20
17dBm@MCS7,HT40
11a: 19.5dBm +/- 1.5dbm @54Mbps
11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20
17dBm@MCS7, HT40
11ac HT20: 20+/-1.5dBm @MCS8
11ac HT40: 17+/-1.5dBm @MCS9
11ac HT80: 14.5+/-1.5dBm @MCS9
11ax HT20: 20+/-1.5dBm @MCS9
11ax HT40: 17 +/- 1.5dBm @MCS9
11ax HT80: 14.5 +/- 1.5dBm @MCS11
Receiver Sensitivity 11b: -99dBm @11Mbps
11g: -95dBm @54Mbps
11g/n: -90dBm @HT20, MCS7
-86dBm @HT40, MCS7
11a: -90Bm @54Mbps
11a/n: -85dBm @HT20, MCS7
-81dBm @HT40, MCS7
11ac: -90dBm +/- 2dBm @VHT20 MCS8
11ac: -85dBm +/- 2dBm @VHT40 MCS9
11ac: -68dBm +/- 2dBm @VHT80 MCS9
11ax: -61dBm +/- 2dBm @HE20 MCS11
11ax: -58dBm +/- 2dBm @HE40 MCS11
11ax: -55dBm +/- 2dBm @HE80 MCS11
Antenna External Antenna connector (IPEX) x4
Frequency Range US, Canada 2.412GHz~2.462 GHz (CH1~CH11)
EU, Japan: 2.412GHz~2.472GHz (CH1~CH13)
5.15GHz ~5.875GHz
Software Security: 64/128-bit WEP Encryption, WPA, WPA2
Driver: Linux
Operating Voltage DC 3.3V ± 5%
Temperature Operating: 0°C ~ +70°C
Storage : -20°C ~ +90°C
Humidity Operating Humidity: 10%~90% non-condensing
Storage Humidity: 10%~90% non-condensing
Dimension 50.95(H) x 30(W)mm

You can choose below to order together for testing.
Antenna:
dipole 3dBi dual bands Pointing
dipole 5dBi dual bands Pointing
Coaxial cable 15cm:
Coaxial Cable 1.13 diameter SMA RP IPEX Pigtail 1130150131X080R Pointing

WiFi6 DBDC 2T2R Card available now.
AW7915-NPDPointing

11ax related reading:

Introduction to 802.11ax High-Efficiency Wireless – NI

IEEE 802.11ax – Wikipedia

We Do Know Your Needs:
We Love to Make the Best You Never Meet.
Good Signal Performance and Good Range

You and Your Crews must Agree with this.
Thanks for you choosing us.

Additional information

11ax 4T4R

11ax 4T4R

WiFi6 4x4

WiFi6 4×4

You may also like…

×